Home > News > Content
What Are The Manufacturing Methods Of Dies And Moulds?
Nov 16, 2017

Want to know what the manufacturing method of the mold? For high precision mold need to use high precision CNC machine tool processing, and the mold material, forming process need strict requirements, also need to use CAD /CAE / CAM mold technology to design, analysis. However, some parts have special requirements in molding, but also need to use advanced hot runner, gas assisted molding, nitrogen cylinder and other processes. The mould processing factory should have CNC, wire cutting machine, EDM and CNC profiling milling equipment, followed by high precision grinding machine, high precision coordinate measuring instrument, computer and related software design etc.. Generally large precision stamping die (such as automobile cover parts mold) should consider whether the machine tool has edge pressing mechanism, even side lubricant, multi station step, etc..  Besides stamping tonnage, the stamping, feeding device, machine tool and die protection device should also be considered.

The manufacturing means and process of the above mould are not possessed and mastered by every enterprise. In the choice of cooperative manufacturers, to understand its processing capacity, not only to look at its hardware equipment, but also with its management level, processing experience and technical strength to consider.

For the same set of moulds, the quotations obtained by different manufacturers are different. You should not pay more than the cost of the mold value at the same time, should not be less than the cost of the mold. The mould manufacturer, like you, should make a reasonable profit in the business. Ordering a much lower priced die will be the beginning of trouble. Users must start from their own requirements, comprehensive measure.

The qualified mold can not produce qualified products in batches. It is mainly related to the machine tool selection, forming process, temperature, time and the operator's technical level. With good mold, but also have good forming processing, it is best to work together, try to avoid long collaboration. If the conditions are not available, we must choose a party in full responsibility, at the same time, must write clearly.

Previous: How Are The Precision Molds Classified?

Next: No Information

Copyright © Suzhou Hongneng Tool & Die Co.,Ltd All Rights Reserved.Tel: +86-512-65690189